Versions Compared

Old Version 6

changes.mady.by.user Kimberly Cruz (Unlicensed)

Saved on

compared with

New Version Current

changes.mady.by.user Ricky Villa

Saved on

Key

  • This line was added.
  • This line was removed.
  • Formatting was changed.

We have created this tool to allow the user to batch edit some of the properties of BACnet connectors

How to Use

1. The user will have to select on the DB Builder application which is under the System Integrator section

Image Modified

2. Once inside, the user has to navigate towards the Connector Tree > BACnet

  • Underneath the Discover section, it will display a list of connectors that have been added by the user
  • The user will have to select on a connector
  • If there are no connectors, the user will have to add them by using the Discover button
    • For more information, it can be found in the following document: BACnet Connector

...

3. Once a connector has been selected, the user will have to use the Tool button Image Modified which is located on the bottom right

4. The user will be prompted with a pop-up called Tools where the user will have to navigate to the following: BACnet > Change BACnet Settings

5. After selecting the tool, a window will pop up called Change BACnet Settings

  • In here the user can customize the filter to only apply changes to some connectors and to choose the exact setting they wish to change (one at a time)

...