Page Comparison

...

There are two ways in which the user can use this tool, from Folio or from DB Builder

From Folio

Image Removed

Where the user will run the bacnetConn query in AXON. And from the list of connectors he will choose the desired one and go to Tool

Image Removed

In there, under Connectors - Bacnet he will find BACnet Stats

Image RemovedImage RemovedImage Removed

After clicking it a window will pop up displaying all information regarding the connector:

• deviceName
• vendorName
• modelName
• connType
• supportsCOV
• isCOVEnabled
• covSubcribed
• covFallBack
• connErrCount
• maxADPUSize
• protocolVersion
• protocolRevision
• segmentation

Image Removed

From DB Builder

Image Removed

The user will open the Connectors menu and select one from the list and then go to Tools

Image Removed

In there, under Connectors - Bacnet he will find BACnet Stats

Image RemovedImage Removed

After clicking it a window will pop up displaying all information regarding the connector:

• deviceName
• vendorName
• modelName
• connType
• supportsCOV
• isCOVEnabled
• covSubcribed
• covFallBack
• connErrCount
• maxADPUSize
• protocolVersion
• protocolRevision
• segmentation

...

Using Folio Launch

1. The user will have to select on the Folio application which is under the Advanced App section

• When selected, the user will have to select on the Launch button

Image Added   Image Added

2. Once inside, the user will have to run an Axon query: bacnetConn

3. When the query runs, the user will be displayed with a list of connectors found in FIN that were added

• The user will select on a connector which will mark the checkbox in blue indicating that the connector has been selected

4. Once selected, the user will select on the Tool icon Image Added

Image Added

5. The user will have to navigate to the following: Connector > BACnet >  BACnet Stats

6. This will display a pop-up called BACnet Connector Stats

• The pop-up will display all information regarding the connector

Image Added

Using DB Builder Application

1. The user will have to select on the DB Builder application which is under the System Integrator section

Image Added

2. Once inside, the user has to navigate towards the Connector Tree > BACnet

• Underneath the Discover section, it will display a list of connectors that have been added by the user
• The user will have to select on a connector
• If there are no connectors, the user will have to add them by using the Discover button
  • For more information, it can be found in the following document: Connector Tree - Adding BACnet Devices

3. Once a connector has been selected, the user will have to use the Tool button Image Added which is located on the bottom right

4. The user will be prompted with a pop-up called Tools where the user will have to navigate to the following: BACnet > BACnet Stats

Image Added

5. After selecting the tool, a window will pop up called BACnet Connector Stats which will display all information regarding the selected connector