Batch Apply Tuning Policy
- Bogdan Dragoescu (Unlicensed)
- Kimberly Cruz (Unlicensed)
The Batch Apply Tuning Policy tool, allows the user to easily change the tuning policy of one or more records, based on the filter chosen.
Location
The user can apply these two different ways via DB Builder > Connectors Tree or Folio > Tools. We'll show how to get to both and using the tool is the same on both.
DB Builder Method
To use DB Builder method, the user will go to the DB Builder app.
Then go to Connectors > Tools > Tuning Policy.
Then select the Batch Apply Tuning Policy tool.
Folio Method
To use Folio method, the user will go to the Folio app and click launch
Then, go to Tools > Connectors > Tuning Policy > and select Batch Apply Tuning Policy.
Batch Apply Tuning Policy tool
After the Batch Apply Tuning Policy tool has been selected, a window will pop up and the user must fill the following fields:
- Record Filter: Here the user determines a filter for which records this tool will add the tuning policy too
- Tuning Policy To Add: From this drop-down list, the user will select a tuning policy to apply to records
The results can be observed in the DB Builder app.
