...
...
...
...
...
...
...
...
...
...
...
...
| Table of Contents |
|---|
Haystack Compatibility
Below are some builds we have tested with. Go ahead and take a look based on what you have and see what is needed to get it connected. If what you have matches but get an error still, look at Haystack Troubleshooting to see if your issue can be resolved from there.
...
You can find the nHaystack modules N4 here (soon to add AX): https://stackhub.org/package/nHaystack (in the mean time for AX, you can find them here: https://bitbucket.org/richiemac_77/nhaystack/downloads/)
The below FIN Stack versions are referring to the framework version not build version.
HTTP Configuration with Standard FIN Stack Install
| Code Block |
|---|
AX3.7.106.1 with FIN Stack v2.1.15 - nHaystack v1.3.0, AuthScheme as Basic/Digest = works |
...
AX3.7.106.1 with FIN Stack v3.0.13 - nHaystack v1.3.0, AuthScheme as Basic/Digest = works |
...
AX3.8.213 with FIN Stack v2.1.15 - nHaystack v1.3.0, AuthScheme as Basic = works |
...
AX3.8.213 with FIN Stack v3.0.13 - nHaystack v1.3.0, AuthScheme as Basic/Digest = works |
...
AX3.8.311 with FIN Stack v2.1.15 - nHaystack v1.3.0, AuthScheme as Basic = works |
...
AX3.8.311 with FIN Stack v3.0.13 - nHaystack v1.3.0, AuthScheme as Basic/Digest = works |
...
N4.2.36.38 with FIN Stack v2.1.15 - nHaystack v2.0.1, AuthScheme as DigestScheme = works |
...
N4.2.36.38 with FIN Stack v3.0.13 - nHaystack v2.0.1, AuthScheme as HTTPBasicScheme = works |
...
N4.3.58.18 with FIN Stack v2.1.15 - nHaystack v2.0.1, AuthScheme as DigestScheme = doesn't work with original haystack pod (need custom haystack pod, look below) |
...
N4.3.58.18 with FIN Stack v3.0.13 - nHaystack v2.0.1, AuthScheme as HTTPBasicScheme = works |
...
N4.4.73.24 with FIN Stack v2.1.15 - nHaystack v2.0.1, AuthScheme as DigestScheme = doesn't work with original haystack pod (need custom haystack pod, look below) |
...
N4.4.73.24 with FIN Stack v3.0.13 - nHaystack v2.0.1, AuthScheme as HTTPBasicScheme = works |
...
N4.7.109 with FIN Stack v2.1.15 - nHaystack v2.1.2, AuthScheme as DigestScheme = doesn't work with original haystack pod (need custom haystack pod, look below) |
...
N4.7.109 with FIN Stack v3.0.18 - nHaystack v2.1.2, AuthScheme as DigestScheme = works |
HTTPS Configuration with Standard FIN Stack Install
| Code Block |
|---|
AX3.7.106.1 with FIN Stack v2.1.15 - nHaystack v1.3.0, AuthScheme as Basic/Digest = works |
...
AX3.7.106.1 with FIN Stack v3.0.13 - nHaystack v1.3.0, AuthScheme as Basic/Digest = works |
...
AX3.8.213 with FIN Stack v2.1.15 - nHaystack v1.3.0, AuthScheme as Basic = works |
...
AX3.8.213 with FIN Stack v3.0.13 - nHaystack v1.3.0, AuthScheme as Basic/Digest = works |
...
AX3.8.311 with FIN Stack v2.1.15 - nHaystack v1.3.0, AuthScheme as Basic = works |
...
AX3.8.311 with FIN Stack v3.0.13 - nHaystack v1.3.0, AuthScheme as Basic/Digest = works |
...
N4.2.36.38 with FIN Stack v2.1.15 - nHaystack v2.0.1, AuthScheme as DigestScheme = works |
...
N4.2.36.38 with FIN Stack v3.0.13 - nHaystack v2.0.1, AuthScheme as HTTPBasicScheme = works |
...
N4.3.58.18 with FIN Stack v2.1.15 - nHaystack v2.0.1, AuthScheme as DigestScheme = doesn't work with original haystack pod (need custom haystack pod, look below) |
...
N4.3.58.18 with FIN Stack v3.0.13 - nHaystack v2.0.1, AuthScheme as HTTPBasicScheme = works |
...
N4.4.73.24 with FIN Stack v2.1.15 - nHaystack v2.0.1, AuthScheme as DigestScheme = doesn't work with original haystack pod (need custom haystack pod, look below) |
...
N4.4.73.24 with FIN Stack v3.0.13 - nHaystack v2.0.1, AuthScheme as HTTPBasicScheme = works |
...
N4.7.109 with FIN Stack v2.1.15 - nHaystack v2.1.2, AuthScheme as DigestScheme = doesn't work with original haystack pod (need custom haystack pod, look below) |
...
N4.7.109 with FIN Stack v3.0.18 - nHaystack v2.1.2, AuthScheme as DigestScheme = works |
For HTTP, make sure "Https Only" is disabled if HTTPS is enabled.
For AX3.5, you will need a concurrent jar - https://project-haystack.org/forum/topic/306
Custom Haystack Pod - N4.3+ with FIN Stack v2.1.15
If you are trying to connect to a N4.3.58.18 station or newer via FIN Stack v2.1.15 use the below custom pod. This will allow you to connect to AX and N4 stations simultaneously. You'll need to do the below steps:
Install latest nhaystack jar files for N4 here: https://stackhub.org/package/nHaystack
How to install nhaystack jar modules here.
Add NHaystackService to services container (go to palette and find nhaystack)
Then right click on NHaystackService to Initialize it
Make sure web service http or https ports are open depending on which you use
Create a new user account and set Authentication Scheme
as DigestSchemeas
DigestSchemeThats it on the Niagara side, then on the FIN
StackFramework side, stop the service
Install this custom haystack pod in the fan folder in the FIN Stack directory (Should look something like this:
CC:\Program Files (x86)\FIN Stack\FIN Stack <your version>\lib\fan):
https://drive.google.com/file/d/1B1W9RPvJltGRjWNKh4HO9yVl8Yx8-BwA/view?usp=sharingStart the service and you should be good.
Tridium Patches
Below are some issues customers have come across that required Tridium patches. If you have any of the issues below, contact your Tridium vendor to get the correct patch to resolve the issue.
If you have N4.3.58.18.3 and JACE crashes, you'll want to try the patch Tridium released to resolve a memory leak issue. The patches mentioned can found below or towards the end of this forum: https://project-haystack.org/forum/topic/537. Released around Jan 22, 2018.
jetty-rt 4.3.58.22.7web-rt 4.3.58.22.7
Having authentication issues between
AX3.8.213andAX3.8.311? If you can't connect when upgrading to one of these AX versions, you'll want to get the below patch from your Tridium vendor. Released around May 14, 2018.web-rt 3.8.312.1