| Table of Contents |
|---|
AHU Air Balance
We have created We have created an AHU Air Balance form that allows the user to either open, close, or release all the vav dampers that the AHU is serving.
How to use AHU Air Balance
The user will go in DB Builder app.
Then, once inside the app, the user will select 1. Select on the DB Builder application which is under the System Integrator section
...
2. Once inside, navigate towards the DB Builder Tree. Select an AHU that serve vavs (vavs that have refs to the AHU) and then go to Tools in the top menu bar. Inside the drop down menu, there is going to be an option called "AHU Air Balance".
3. Once the user has made a selection, the user will have to use the Tool button which is located on the bottom right
4. The user will be prompted with a pop-up called Tools where the user will have to navigate to the following: AHU Air Balance
...
5. After the option has been selected there is going to be a popup window with required fields to select.
The required fields to select are:
- Open All Vav Dampers 100%:
- **Close All Vav Dampers 0%:
- Release All Vav Dampers to Auto:
...
6. When a field has been selected, the user can hit Apply and the form will then execute the change.
| Warning |
|---|
Use with cautionThis is very risky because you could close all the VAV boxes that are attached to this AHU, which could cause too much pressure in the duct. |
...