AHU Air Balance

We have created an AHU Air Balance form that allows the user to either open, close, or release all the vav dampers that the AHU is serving.

1. Select on the DB Builder application which is under the System Integrator section

2. Once inside, navigate towards the DB Builder Tree. Select an AHU that serve vavs (vavs that have refs to the AHU)

3. Once the user has made a selection, the user will have to use the Tool button which is located on the bottom right

4. The user will be prompted with a pop-up called Tools where the user will have to navigate to the following: AHU Air Balance

5. After the option has been selected there is going to be a popup window with required fields to select.

6. When a field has been selected, the user can hit Apply and the form will then execute the change.

This is very risky because you could close all the VAV boxes that are attached to this AHU, which could cause too much pressure in the duct.