Settings

The Settings app allows the user to:

1. Enable and disable different extensions of FIN Framework

2. Change the project settings

3. Add or edit a header

4. Change the alarm settings

5. Configure the sync and purge settings for Alarms, Snapshots and Histories

Location

To use the Settings app, just select the Settings app in the right side menu then click on it and a slide menu will be revealed.

1. Select the App Launcher icon on the top left

2. Select the Setting tile under Advanced Apps

Image Added

3. This will display two sections:

• Sync and Purge

• Legacy Settings

Image Added

Sync and Purge

These settings allows the user to configure the sync and purge settings for Alarms, Snapshots, Histories, and Logs at the moment. The sync settings work along with the FIN Network tree to sync from remote projects available on the network.

Extension

In order to use the functionality, both FINNetwork and Purge extensions must be enabled

Follow the steps below to enable the extensions:

1. Select the App Launcher icon on the top left

2. Select the Setting tile under Advanced Apps

   • This will open a drawer with the following options: Ext, Proj, Header, Alarm, and Custom

3. Select the Ext option to open up the extensions

   • This will open a side menu on the right where the extension will be in alphabetical order

4. Scroll down and find the following extensions: FINNetwork and Purge

   • If the version number is green, this means that the extension is enabled

   • If the version number is red, this means that the extension is disabled

5. Select on the extension if it is disabled, this will open a drawer

6. Select on the Enable option

7. Refresh the page

Alarm

This will sync and/or purge alarms.

Image Added

• Alarm Sync

  • Subscribes to all remote devices, polling for any changes in alarms every 5 seconds. All alarms that match the Alarm Sync filter will be kept in sync, with the remote device acting as the "master" for the alarm.  The local copy can be acknowledged, which will inform the remote device to perform the same ack, by the current user. The alarmable points need to exist in the local instance for alarms to be synced.

• Alarm Purge

  • Once a day at 12:15 AM (system time), the system will purge all alarms older then the given limit in the local database.

Histories

This will sync/purge histories.

Image Added

• History Sync: Will sync all Haystack and BACnet points set up to synchronize their history (have tags his and haystackHis/bacnetHis) at the given schedule/frequency. The trended points need to exist in the local instance for history to be synced.

• History Purge: On the first of every month at 12:15 AM (system time), the system will purge all histories older then the given limit.

Enable History Purge	Enables or disables the history purge module
Run History Purge	Will execute the history purge task immediately, using the given parameters. It is also independent of the schedule frequency.
History Max Age	How old the history data has to be for purging
Enable History Sync	Enables or disables the history sync module
Run History Sync	Will execute the history sync task immediately
History Sync Frequency	When the histories get synced to the project. Note: The frequency is based on an AND (not OR ) statement. Example: Date Range: 2021-04-21,2022-04-21 Days of the Week: Monday, Wednesday Results: Date Range ANDDay of the Week → Histories will be synchronized every Monday and Wednesday from 2021-04-21 to 2022-04-21 Image Added   Every: Interval number to generate events at a fixed frequency At: One or more explicate times to run Code Block Frequency Examples //run every 5 minutes every day Every: 5 minutes // run at midnight and at 2pm every day At: [00:00, 14:00] // run at 2am on weekdays only At: [02:00] Days of the Week: "mon,tue,wed,thu,fri" // run at 2am on 1st and 15th of the month At: [02:00] Days of the Month: "1, 15" // run at 2am on last day of the month At: [02:00] Days of the Month: "-1" // run at 2am on first Monday of the month At: [02:00] Days of the Week: "mon" Days of the Month: "1,2,3,4,5,6,7"

Snapshots

This will sync and/or purge backups.

Image Added

• Snapshot sync: Would sync the backups from remote devices to local project Backups folder in the file system. Synced snapshots will appear as “Remote” snapshots in the Snapshots Tree . This is to differentiate from the local snapshots.

• Snapshot purge: Would purge the backups in the local database only every once a day at 12:15 AM (system time).

Enable Backup Purge	Enables or disables the backup purge module
Run Backup Purge	Will execute the backup purge task immediately, using the given parameters. It is also independent of the schedule frequency.
Max Backups - Local and Remote	The number of backups to keep for both local or remote
Enable Backup Sync	Enables or disables the backup sync module
Run Backup Sync	Will execute the backup sync task immediately
Backup Sync Frequency	When the backups get synced to the project Note The frequency is based on an AND (not OR ) statement. Example: Date Range: 2021-04-21,2022-04-21 Days of the Week: Monday, Wednesday Results: Date Range ANDDay of the Week → A backup will be created every Monday and Wednesday from 2021-04-21 to 2022-04-21 Image Added   Every: Duration number to generate events at a fixed frequency At: One or more explicit times to run Code Block Frequency Examples //run every 5 minutes every day Every: 5 minutes // run at midnight and at 2pm every day At: [00:00, 14:00] // run at 2am on weekdays only At: [02:00] Days of the Week: "mon,tue,wed,thu,fri" // run at 2am on 1st and 15th of the month At: [02:00] Days of the Month: "1, 15" // run at 2am on last day of the month At: [02:00] Days of the Month: "-1" // run at 2am on first Monday of the month At: [02:00] Days of the Week: "mon" Days of the Month: "1,2,3,4,5,6,7"

Legacy Settings

Ext 

The Ext menu is that part of the Settings app, that allows the user to enable or disable:

• Applications

• Connectors

• Functionalities depending on the uses and needs

In order to do that, click the Disable or Enable button

Image Added

Proj

The Proj menu is that part of the Settings app, that allows to change the projects, audit and email settings and also set Categories.

Image Added

Project settings

Can change the Project display name and the description.

After the changes are done, click the Apply button in the right down corner

Image Added

Audit Settings

Can check what changes in the program are going to be logged. To do that simply mark the desired checkbox.

Image Added

Query Audits Examples

If the user would like to query for certain logs, they can do so by going to Folio → Launch and running any of the examples below depending on what they are looking for. Each query is followed with // that includes a comment of what example it is for and it is not to be copied. Then to have a copy of the queried logs, toggle to the Zinc view from the Grid towards the top right side of Folio. Select all and copy to a notepad to save.

All Audits:
logRead(toSpan("today"), "name==\"audit\"") //to view any commands and commits
logRead(toSpan("today"), "name==\"audit\"").findAll r=> not r->msg.contains("invoke") //to view any commits (not commands)
logRead(toSpan("today"), "name==\"audit\"").findAll r=> r->msg.contains("Damper") //to view anything that has "Damper" in it
logRead(toSpan("today"), "name==\"audit\"").findAll r=> r->user.contains("ricky") //to view anything commanded or committed by user "ricky" (username)
logRead(toSpan("today"), "name==\"audit\"").findAll r=> r->msg.contains("26580f36-79a69768") //to view specific record with id "26580f36-79a69768" (id only appears on audits where a record was added, removed, or modified)

Point Commands only:
logRead(toSpan("today"), "name==\"audit\"").findAll r=> r->msg.contains("invoke") //to view any point that was commanded (not commits)
logRead(toSpan("today"), "name==\"audit\"").findAll r=> r->msg.contains("invoke") and r->user.contains("ricky") //to view any point commanded by user "ricky" (username)
logRead(toSpan("today"), "name==\"audit\"").findAll r=> r->msg.contains("invoke") and r->msg.contains("Damper") //to view any point commanded and that contains "Damper" in the name
logRead(toSpan("today"), "name==\"audit\"").findAll r=> r->msg.contains("invoke") and r->msg.contains("Vav-01") //to view any point commanded under equip called "Vav-01"

Sessions only:
logRead(toSpan("today"), "name==\"session\"") //to view all sessions
logRead(toSpan("today"), "name==\"session\"").findAll r=> r->msg.contains("Login") //to view who logged in
logRead(toSpan("today"), "name==\"session\"").findAll r=> r->msg.contains("Logout") //to view who logged out
logRead(toSpan("today"), "name==\"session\"").findAll r=> r->msg.contains("ricky") //to view sessions of specific user "ricky" (username)

Date filter:
You'll notice that the toSpan is for "today". You can substitute today with yesterday, thisWeek, lastWeek, thisMonth, lastMonth, thisYear, lastYear, specific day, or range. Like below.
logRead(toSpan("today")
logRead(toSpan("yesterday") //... etc
logRead(toSpan(2020-05-20) //specific day (yyyy-mm-dd)
logRead(toSpan(2020-05-10..2020-05-20) //range

Project Categories

Can create project categories, the categories are used to set Actions filter

1. To add a new category, click on the Select Category dropdown

2. Select Create New option

Image Added

3. Hit Next button to continue to the next step

4. This will pop up a new window in which the user will choose the name and the display name of the new category

5. Once completed the sections, they can select the Apply button

6. To edit an existing category, click on the Select Category dropdown, select a specific category and hit Next button

7. A window will pop up to allow to update the display name

8.. Once done, click on the Apply button to apply the changes

Image Added

Header

The Header menu is that part of the Settings app, that allows the user to enable/disable or edit a header for the current project.

Image Added

Enabling the header

In order to do that, click on the Header button which can be found in the Settings app slide menu.  The Configure Header window will pop up to to specify the below options:

• Home - Choose one of the three options below to add to the home button

  • action - User can choose to add an action that is executed when selected

  • hash - User can add part of the graphic path they want here so the graphic will appear when selected (open the graphic and copy the url with or without the '#' and everything after it and paste it here)

  • url - User can add any url they would like here

Image Added

When the Header configuration is finished, click on the Next button and reload the UI to continue and add new header menus. Then hit Finish and refresh browser to see new changes.

Disable Header

In order to disable the Header, check Disable Header checkbox, click Next and refresh the browser. 

Add Button

When you user selects to Add or Edit a button, they will get the below pop up to modify the button.

Image Added

The available options in this popup are below.

• Set Display Name- This is the name that will appear on the button

• Set Icon - This is optional and it will appear on the left of the label name. Can choose from the list provided

• Set Badge- This is optional and compliments the Badge Query option. Depending on which option selected, will color the fill of the oval circle that Badge Query makes.

• Set Link - Can choose one of the three options below to add a link to the button. They specify the "Link Type" after this. (Its recommended not to add a link on button if going to add submenu items on it)

  • action - User can choose to add an action that is executed when selected

  • hash - User can add part of the graphic path they want here so the graphic will appear when selected (open the graphic and copy the url with or without the '#' and everything after it and paste it here)

  • url - User can add any url they would like here

• Add Submenu Button- This will add a new item under the selected button.

• Reorder Submenu Button- This will allow to reorder the submenu buttons as they wish.

Reorder Buttons

If the user wants to reorder the buttons, they can do so by selecting that option. Then select what order they are going to be by selecting the Up or Down option.

Image Added

Alarm

The Alarm menu is that part of the Settings app, that allows to disable alarm notification or to control how often the alarm notification poll (in seconds)

Image Added

 Image Added