...
There are multiple guides that provide the step by step process involved in configuring an F200 Device. See below:
Reference the F200 Installation Guide (Quick Install).
Reference the F200 Installation Guide (Full install)Reference the F200 Installation Guide (Video).
Schedule an "F200 Configuration Walkthrough" meeting with your FIN Distribution Partner.
...
F200 Devices use a unique FIN licenses license known as “FIN Embedded licenses”. Embedded licenses were made Made to be generally more cost-efficient than a standard FIN Server license to accommodate typical embedded device usage. Embedded , embedded licenses also come with 2 years of included License LCM (Life Cycle Maintenance) and are also renewed renew in 2 two year intervals.
How do I purchase a license for the FIN Stack software running on an F200 Device?
In order to license FIN Stack running on an F200 Device, you must request & to purchase a FIN Embedded License from your FIN Distribution Partner. If available, be sure to include your Company Name, Host ID & Project Name when requesting or purchasing an embedded license.
...
Manual Upload: The standard method for installing a license onto a FIN Stack Server can be found here.
Edge2Cloud: Users with access to the Edge2Cloud licensing server can configure and auto-install an embedded license onto their F200 Device’s FIN Stack server by following the steps described in the F200 Installation Guide.
How to factory reset manually?
Power off the device.
Hold the SVC button.
Power on the device.
All the LED lights come on solid and then turn off.
Continue holding the SVC button until the green RUN light comes on solid, then release. (approx. 30 seconds)
After releasing, all the LED lights come on solid and then turn off, the device is now reset and rebooting.
Warranty
For warranty information please contact:
Siemens Field Technical Support
Tel: 1.800.877.7545
Email: support.us.i-bt@siemens.com