...
...
...
...
...
...
...
...
...
...
...
...
The Add Action tool allows the user to be able to add
...
actions
...
to single or multiple records.
1. The user will have to select on the DB Builder application which is under the System Integrator section
...
2. Once inside, the user has to navigate towards the DB Builder Tree
The user will select
...
any type of available site, floor, equip, or
...
point(s)
...
3.
...
Once the user has made a selection, the user will have to use the Tool
...
button
...
which is located on the bottom right of the tree view
4. The user will be prompted with a pop-up called Tools where the user will have to navigate to the following: Action
...
Category > Add Action
\
5. After the Add Action tool has been selected there is going to be a popup window called
...
Add Action
...
with the required fields to fill out
...
6. The next window called
...
Add Action will allow the user to specify the action they would like to add to the filtered records.
...
Example: Adding a new action called "New Action" to a single point and it will be a manual type.
7. When the user selected on the Apply button, the next form called
...
Add Action
...
will show the user if they want to continue to add more actions in the same point you searched in the 1st form
8. The user will have to check off the box if they want to continue adding actions before clicking on the apply button
Otherwise, hit Apply and the tool will automatically add the action property tag based on what you set in step 4
...
We can see our New Action available on our damper point we chose to add a new action to.