- Continued from Install Latest NHaystack Module
- Run the Initialize Haystack, Rebuild Cache, and Remove Broken Refs actions.
- You can confirm that it connects to haystack by going to niagaraStationIp/haystack/about. Below is an example of what you should receive. If not, here are some trouble shooting steps Haystack Troubleshooting.
- You can confirm that it connects to haystack by going to niagaraStationIp/haystack/about. Below is an example of what you should receive. If not, here are some trouble shooting steps Haystack Troubleshooting.
- Select Connectors in your DB Builder and click the plus icon to add a new haystack connector.
- Enter your credentials:
- URI: Enter the IP address that connects to the station.
- Display Name: Name you want to call that connector.
- Haystack Slot: Yes = Only points that have haystack slots will be allowed to be imported to your DB Builder.
- Equip Filter: If haystack slot = YES, filter equipment that is allowed to be imported.
- Point Filter: If haystack slot = YES, filter points that is allowed to be imported.
- Username & Password: Same credentials used to login to station.
Once you are connected, you'll be able to see the same structure as you do in Niagara.
