Versions Compared

Old Version 6

changes.mady.by.user Ricky Villa

Saved on

compared with

New Version Current

changes.mady.by.user Kimberly Cruz

Saved on

Key

  • This line was added.
  • This line was removed.
  • Formatting was changed.

...

...

...

...

Table of Contents

How to add a BACnet IP connector

...

Enabling BACnet extension

1. Make sure that the Bacnet

...

extensions are enabled in the Settings app

...

Image Removed

Then the user selects Bacnet to add that particular connector.

Image Removed

...

> ext3

Must have BACnet extension enabled to be able to use FIN Network Tree

This can be done by following the steps below:

  1. Select the App Launcher icon on the top left

  2. Select the Settings tile under Advanced Apps

    • This will open a drawer with the following options: Ext, Proj, Header, and Alarm

  3. Select the Ext option to open up the extensions

    • This will open a side menu on the right where the extension will be in alphabetical order

  4. Scroll down and find the following extension: BACnet

    • If the version number is green, this means that the extension is enabled

    • If the version number is red, this means that the extension is disabled

  5. Select the extension if it is disabled, this will open a drawer

  6. Select the Enable option

  7. Refresh the page

How to add a BACnet Connector

1. Select the App Launcher icon on the top left

2. Select the DB Builder tile under System Integrator Apps

3. Expand BACnet tree then click on BACnet

4. Select on the (plus) then select on Add BACnet Connector

Image Added

5. After selecting Add BACnet Connector, a pop-up window called Add BACnet Connector will open. 

5. Enter the connectors info to be able to create it. The required fields are:

Image Added

  • Display Name: this is the name that the user wants to choose for his

...

  • connection

  • Host

...

  • Device

...

  • Instance: this is the device id

...

Once the user is done, hit create and the connector is created.
Image Removed
After hitting Create the devices will get added to the connectors list
Image Removed

Bacnet Template

If configuring a connector manually for bacnet template, make sure to add the below tags that would be needed if using our template logic found in the bacnetProperties.trio file.

  • description (Str) - this consists of  <siteName.floorName.ahuName> and formatted in that order.
  • location (Str) - this consists of <roomName.tenantName> and formatted in that order
  • objectName (Str) - device name
  • vendorId (Num) - vender id of the device being used
  • vendorName (Str) - vender name of the device being used

Note: If doing a bacnet template, next step after adding bacnet connector manually is Connector TemplateOn.

How to discover your BACnet IP devices

To discover a Bacnet Device the user will simply hit the plus sign first, and then instead of pressing the type of connector the small Magnifying glass in the top right corner will be pressed.

Image Removed
This icon will pop up the device discovery menu, in which the user will select the type of connector to search for...in our example: Bacnet.
Image Removed
Next the user can manually put in the Broadcast Address, Bind Address, Instance Number Start/End, Network Number, and Timeout or hit the Discover button to discover as is.
Image Removed
The discovery process only finds the devices available in the user network (VPN is NOT included). Once all the devices have been found the user will select the desired one and hit the Add button.
Image Removed
Then the window can be closed and the new added device can be found in the connectors window.
Image Removed
Info
titleExtra Tags

For more advanced settings on the Bacnet connector the user can add:

  • the marker tag: bacnetUseConfirmedCov to make the COV subscription mechanism to use confirmed COV messages.
  • the number tag: bacnetInstance to specify what device instance number is used when the connector is in COV mode, the default instance number is 22000. Setting this value is required to avoid potential conflicts with an existing device on the network with the same instance number as the default used by the connector.

Can't discover devices or have non-standard devices?

If you are having trouble discovering devices or there are devices that are non-standard, go to this doc page: Multiple BACnet Instances or Non-standard port

  • Network Number

  • MAC Address

6. After you are done entering the device information, click on the Add button

7. You will then be able to see your connector and be able to add your points to the DB Builder.

   Image Added

How to discover your BACnet devices

1. Navigate to the Connector Tree

2. Then expand it so you can see the Select on BACnet option

3. Will be presented two option on the grid view

  • Discover Settings: Change the settings of the discovery

  • Discover

Image Added
Image Added
Info

If the user wants to change the settings of their discovery, select Discover Settings

This will open a pop-up and will include the following:

  • Broadcast Address: Most of the times it will be FF, but the user can broadcast to a specific device if its address is known 

  • Instance Number Start: It is set to 0 by default and can be changed if needed to narrow down the discovery

  • Instance Number End: It is set to 4194303 by default and can be changed if needed to narrow down the discovery

  • Network Number: It is set to 65535 by default and can be changed if needed

  • Timeout: this is how long it should try to discover

4. Select any of the discovered devices and select the Add button on the bottom right corner to add them to your connectors panel.