Batch Update AHU Ref

We have created Batch Update AHU Ref form that allows the user to easily add/update an ahuRef property that includes the correct AHU that those vavs serve.

1. The user will have to select on the DB Builder application which is under the System Integrator section

2. Once inside, the user has to navigate towards the DB Builder Tree

• The user will select a type of available point(s) they want to update

3.  Once the user has made a selection, the user will have to use the Tool button  which is located on the bottom right

4.  The user will be prompted with a pop-up called Tools where the user will have to navigate to the following: Batch Update AHU Ref

5. After the option has been selected there is going to be a popup window with the required field to select which AHU the vavs serve.

The required field to select is:

• Select AHU: This is a dropdown that displays all AHUs found under that site as available options.

6. When an AHU has been selected, the user can hit Apply and the form will then execute the change.

7. You can see that the ahuRef was added to each of the vavs by viewing their ahuRef property tags individually or grid view