Network Report

Owned by Andrew Tuma
Last updated: Jun 13, 2020 by Ricky Villa

We have created this tool to allow the user to see information about a specific network: how many connectors are, the status, errors and so on


1. The user will have to select on the DB Builder application which is under the System Integrator section

2. Once inside, the user has to navigate towards the Connector Tree > BACnet

  • Underneath the Discover section, it will display a list of connectors that have been added by the user
  • The user will have to select on a connector
  • If there are no connectors, the user will have to add them by using the Discover button
    • For more information, it can be found in the following document: BACnet Connector

3. Once a connector has been selected, the user will have to use the Tool button  which is located on the bottom right

4. The user will be prompted with a pop-up called Tools where the user will have to navigate to the following: BACnet > Network Report

5. After selecting the tool, a window will pop up called Network Report

  • In here, the user can filter the connectors and choose the way they wish the reports to be displayed: Table or Text Area

   

6. Once filled out, the user can select on the View Report button which will display:

Table Report

 

Text Area Report